Hazops training are intended to:

1. Give an appreciation of the risk management process to position HAZOP within that process
2. Provide an in-depth understanding and experience of the various HAZOP techniques and their correct application

HAZOPS TRAINING PROGRAMS
• Introduction and course objectives
• Basic introduction to the risk assessment process
• Different hazard identification techniques
• Hazard & Operability Study: Basic Concept & Methodology, Terminology
• The role of the chairman, secretary and the team members
• Risk ranking at the HAZOP study
• HAZOP process in detail including the follow-up and review process
• Detailed look at the HAZOP process
• Introduction to technique for procedural HAZOP
• Procedural HAZOP exercise including discussion of results
• HAZOP actions/recommendations and HAZOP reports
• Introduction to the HAZOP 2 technique
• Advantages and disadvantages of the HAZOP technique
• Pointers for effective HAZOPs
• Course review including question and answer session

WHO SHOULD ATTEND?
This Hazops Training are aimed at managers, designers, plant operators, safety specialists and all those concerned with the safe and efficient performance of potentially hazardous Plant and operations.

HAZOPS TRAINING DURATION
21 hours effective ( 3 days)

TRAINER :

Dr. Bambang Murtjahjanto, M.Sc, P.E. 

Berpengalaman dalam bidang HSE selama 30 tahun. Karirnya dimulai sejak menjadi HSE Engineer di Roy Huffington, Inc (Hufco – Badak) pada tahun 1982 – 1987, kemudian menjadi gas plant manajer di PT. Asahimas Flat Gas, Operation Manager di Dupont Chemicals, Inc USA dan beliau pernah juga menjabat sebagai South East Asia Manufacturing Manager di GE Power and Locomotive USA. Selain aktif sebagai professional HSE, beliau juga aktif dalam memberikan training dan konsultasi di bidang Quality, HSE dan Engineering. Klien yg pernah ditangani diantaranya: PT. INKA, PT. Jawa Power, PT. Agaton Mandiri, PT. PAL Indonesia, McDermott Batam,  Chevron Pasific Indonesia, Kondur Oil Co, PT. Pertamina Drilling Service, Total Elf Senipah, JOB Pertamina – Talisman, dll.  Pendidikan formal beliau adalah: Instrumentation Engineering ITS – Surabaya, Master Graduate in Reliability Engineering dan PhD in Engineering System dari University of Century – Albuquerque NM USA.

Soehatman Ramli and partners
Berpengalaman di bidang Occupational Health & Safety dan Environment selama lebih dari 35 tahun. Pernah menjabat sebagai EHS Manager, Marketing and Trading Pertamina. Saat ini aktif dalam memberikan training dan konsultasi dalam bidang Occupational Health & Safety dan Environment di berbagai perusahaan. Klien yang pernah beliau tangani diantaranya Kondur Petroleum, BP Migas,Indonesia Power,Nippon Shokubai, Pertamina, Telkom, Blue Scope Steel. Beliau pernah menjabat sebagai Ketua Ikatan Ahli K3 Indonesia (IAKKI) sekaligus Ketua Penyusunan Standard Kompetensi K3 Indonesia. Pendidikan formal beliau adalah Teknik Kimia, selain itu juga mendapatkan gelar Dipl. Safety dari British Safety Council, serta Graduate of Safety Management Universitas Indonesia. Beliau juga adalah Lead Auditor OHSAS 18001 dan Iso 14001.

SCHEDULE TRAINING HAZOPS 2012

INVESTMENT
Pendaftaran per peserta                                                                                   IDR 8.000.000,-
Pendaftaran & Pelunasan 2 minggu sebelum training                            IDR 7.750.000,-

Gratis orang ke 5, untuk pendaftaran 4 orang dari satu perusahaan

Fasilitas Training: Modul Training yang berkualitas (hardcopy dan softcopy), Training Kit: tas, Block Note, ballpoint, termasuk jaket atau t shirt, Lokasi training yg nyaman di hotel berbintang empat / lima, Makan Siang, coffee / tea break, Sertifikat,Flash disk berisi materi training, Foto bersama seluruh peserta

TESTIMONIAL PESERTA:

“Trainingnya menarik, sangat banyak menambah pengetahuan saya dan membuat saya lebih mudah menemukan ide baru dalam hal pekerjaan. trainer yang berpengalaman sangat menunjang dalam keberhasilan training ini.”  Mutia Sari, PT. Rekayasa Industri

“Sangat bermanfaat, menyenangkan, komunikatif, enhancing, enriching training!”  Nendra Gunawan, PT. Rekayasa Industri

“Trainer sangat menguasai materi karena pengalaman secara teori di pekerjaan sehingga terjadi diskusi yang sangat menarik dan berkualitas”  Wamadiharjo S. PT. Holcim Indonesia, Tbk Cilacap Plant

“Penyampaian materi secara simple namun tepat guna untuk diaplikasikan dalam kegiatan ditempat kerja untuk meningkatkan produktivitas serta keamanan dari karyawan”  Dony G.L, PT. Asahimas Chemical

“Materi yang diberikan oleh instruktur sangat bermanfaat untuk diterapkan dilapangan dan ilmu pendukung materi sangat bervariasi ”  Triyanto, PT. Pertamina Hulu Energy

“Pelatihan cukup bermanfaat dengan tempat yang ok dan suasana kondusif, trainer yang berpengalaman adalah kunci utama”  Rully Eko Ardianto, PT. Petrokimia Gresik

“Bapak Soehatman Ramli sebagai instruktur memberikan penjelasan yang sangat baik tentang HAZOPS ini sehingga saya mendapatkan ilmu yang sangat bermanfaat sekali dalam menilai kelayakan suatu instalasi/plant”  Ermawan, PT. Indospec Asia

“Instruktur yang baik dan sangat menguasai materi dapat menambah serta meningkatkan pengetahuan saya baik dalam wawasan atau skill”  Herman Susilo, PT. humpuss Group

“Dari materi training Hazops ini kami peserta dapat menambah wawasan bagi keselamatan/plant dari segi safety supaya bahaya dapat di tekan agar keuntungan dapat tercapai”  Rusdi Amin Susanto. Amd. PT. Pertamina Persero RU III Plaju

“Saya sangat berkesan dan salut atas penguasaan semua materi yang diajarkan dan penyampaian yang interaktif terhadap semua peserta training, oleh instruktur Bpk. Soehatman Ramli, semoga menjadi amal ibadah”  Andri Razul, PT. Chevron Pasific Indonesia

“Banyak pengetahuan dan teori baru yang dapat saya pelajari, dan penyampaian juga atraktif” Mohammad Ramli, JOB Pertamina – Petrochina East Java

“Sangat baik, saya mendapatkan banyak pengetahuan baru dengan mengikuti training ini. apalagi instrukturnya sangat berpengalaman di bidang engineering maupun safety proses. terima kasih Phitagoras” Isti Edvi Linawati, PT. Krakatau Engineering

“Menambah wawasan, pengetahuan, improving mengenai hazard operational process. Konsep, bahan training, tehnik pengajian instruktur cukup baik” Johannes Sarwoko, PT. Krakatau Engineering

REFERENSI:
1. PT. Badak NGL
2. PT. Sulfindo Adiusaha
3. PT. Titan Petro Kimia Nusantara
4. PT. Sucofindo
5. Santos (Sampang) PTY LTD
6. PT. Multi Nitrotama Kimia
7. PT. Surya Esa Perkasa
8. PT. Radiant Utama Interinsco, Tbk
9. BP Indonesia
10.PT. Java Velosi Mandiri
11.Chevron Indonesia Company (Balikpapan)
12.Chevron Makasar Ltd
13.Santos (Sampang) PTY LTD
14.PT. Cipta Mortar Utama
15.PT. Arun NGL
16.PT. Terralog Teknologi Indonesia
17.PT. Jotun Indonesia
18.CNOOC SES Ltd
19.PT. Chevron Pacific Indonesia
20.PT. Sucofindo Bontang
21.Pertamina EP
22. Pertamina Persero RU III Plaju
23. PT. CPI
24. JOB Pertamina – Petrochina East Java.
25. PT. Asahimas Chemical
26. PT. Krakatau Engineering
27. PT. Petrokimia Gresik
28. PT. Humpuss Group
29. PT. Indospec Asia
30. PT. Total E&P Indonesia
31. PT. Wijaya Karya
32. PT. CNOOC SES Ltd
33. PT. Pertamina Hulu Energy – West Madura Offshore
34. PT. Holcim Indonesia Tbk
35. PT. Rekayasa Industri

Training Hazops Angkatan XI di selenggarakan di hotel aston primera, bandung 28 - 30 September 2011

Download Silabus

The skill and information that will be learned about :
•    What’s workplace stress and fatigue.
•    Key facts about stress and fatigue, and their implications for employers
•    How to manage workplace stress and fatigue

COURSE PROGRAMMED:
•    The causes of workplace Stress and fatigue
•    The consequences of workplace Stress and fatigue
•    Recovery from fatigue.
•    Whole-of-work factors
•    Stress and Fatigue leads to physical and mental impairment
•    Various strategies can minimise Stress and fatigue
•    Preventing workplace Stress and fatigue requires cooperation and compromise
•    Various strategies are available for managing shift work to minimise stress and fatigue
•    Manage risk
•    Train and educate
•    Monitor and evaluate
•    Strategies for small employers

WHO SHOULD ATTEND
Anyone interested in improving health and safety and productivity will benefit from attending this program, including:
•    Health and Safety Committee members
•    Managers, supervisors and worker
•    Facility managers
•    Human resources managers
•    Senior managers
•    Others with health and safety responsibilitie

TRAINER
Dr. Abdul Baktiansyah,MKK
He has experienced in Occupational Health& Safety and Industrial Hygiene for almost 30 years. He was graduated from Faculty of Medicine, Airlangga University in 1979 and Master of Science in Occupational Medicine, University of Indonesia in 2004. He started his career as Occupational Health practicioner at PT. Ekspan Kalimantan, he later became Chief Medical Officer and then Occupational Health & Industrial Hygiene Coordinator at PT. Medco Energy. His Expertise and experienced give him a very broad perspectives in handling any issues related to Occupational Health and Industrial Hygiene.

SCHEDULE:

Please Call Us

INVESTMENT:
Pendaftaran per peserta                                                                         Rp. 3.500.000,-
Pendaftaran & Pelunasan 2 minggu sebelum training                        Rp. 3.250.000,-
Gratis orang ke 5, untuk pendaftaran 4 orang dari satu perusahaan
Quality training material (hardcopy and softcopy), Quality training kits: bag, block note, ballpoint, including jacket or T-shirt, etc, Convenient training facilities in four or five stars hotel, Lunch per day, morning and afternoon coffee / tea breaks for along the training, Certificate, Exclusive flash disk, Photo

Download Silabus

ahli k3

Ergonomics deals with the compatibility between workers and their work. Poor ergonomic conditions exist when the “work” is incompatible with the workers’ bodies and their ability to continue working.

OBJECTIVES of OFFICE ERGONOMICS SEMINAR
The specific objectives of this Office Ergonomics Seminar were to enable you to:
• Develop an understanding of the basic elements of office ergonomics;
• Identify tasks that can potentially cause work-related musculoskeletal disorders (WMSD) and other injuries to the muscles and joints;
• Develop an ergonomics program and set goals for your workplace; and
• Focus on problem solving through employee and management involvement.

OFFICE ERGONOMICS SEMINAR PROGRAMS
1. Ergonomics Hazards in the Office Workplace
2. Office Ergonomics Program
3. Ergonomic Regulations, Standards, Guidelines and Legislation
4. Ergonomic Survey

WHO SHOULD ATTEND?
Courses are aimed at managers, supervisors, workers, people working from their homes, occupational health nurses, occupational therapists, chiropractors, health and safety representatives and health and safety professionals.

TRAINER :
Dr. Abdul Baktiansyah,MKK
He has experienced in Occupational Health& Safety and Industrial Hygiene for almost 30 years. He was graduated from Faculty of Medicine, Airlangga University in 1979 and Master of Science in Occupational Medicine, University of Indonesia in 2004. He started his career as Occupational Health practicioner at PT. Ekspan Kalimantan, he later became Chief Medical Officer and then Occupational Health & Industrial Hygiene Coordinator at PT. Medco Energy. His Expertise and experienced give him a very broad perspectives in handling any issues related to Occupational Health and Industrial Hygiene.

SCHEDULE:
Please Call Us

INVESTMENT

Please Call Us

ahli k3

Phitagoras adalah perusahaan jasa training, konsultasi dan audit di Bidang Kesehatan dan Keselamatan Kerja (K3), Mutu dan Produktifitas, Lingkungan, Laboratorium serta ISO Series (ISO 9001:2008, ISO 14001:2004, OHSAS 18001:2007, ISO 22000:2005, ISO/IEC 17025:2005).

Adapun bidang jasa training k3, pelatihan k3 dan kursus k3 yang ditawarkan antara lain :

Pelatihan K3:

1. Sistem Manajemen Kesehatan dan Keselamatan Kerja (SMK3) berdasarkan OHSAS 18001:2007
2. Health and Safety Auditing based on OHSAS 18001:2007
3. Contractor’s Safety Management System (CSMS)
4. Ahli K3 Umum (AK3 Umum), sertifikat dikeluarkan oleh Depnaker
5. Basics of Health and Safety
6. Hazard Identification and Risk Assessment
7. Professional Accident Investigation
8. HAZOPS (Simulation using software PHA 6)
9. Emergency Response Plan (ERP)
10. Behavior Based Safety
11. First Aid at Work
12. Applied Industrial Ergonomic
13. Basic Occupational Health & Safety and Industrial Hygiene
14. Shiftwork Management in reducing Stress and Fatigue in the Workplace
15. Chemical Hazardous Handling
16. Kesehatan dan Keselamatan Kerja di Rumah Sakit

Pelatihan K3 bersertifikasi Internasional

NEBOSH International General Certificates in Occupational Safety and Health

Program Inhouse Training K3:
In House Training K3 merupakan solusi tepat bagi perusahaan Anda karena dirancang khusus sesuai dengan culture, produk atau jasa dan proses dari perusahaan anda.
Semua topik public training kami dapat diselenggarakan secara in house di perusahaan Anda, adapun topik in house training lainnya adalah:

1. Health and Safety for Warehouse Workers
2. Health and Safety Working on Extreme Temperature (Hot Environment)
3. Respiratory Protection Plan
4. Designing an Effective PPE (Personal Protective Equipment) Program
5. Job Safety Analysis
6. Basic First Aid
7. Chemical Hazards: Understanding, Recognizing and Managing
8. Electrical and Mechanical Safety
9. Best Practice in Office Hygiene Implementation
10. Working in Elevation
11. Applied Noise Control in the Workplace
12. Hazard Identification and Control
13. Hearing Loss Prevention Program
14. Traffic Safety
15. Safe Business through Health & Safety Program Implementation
16. Train the Safety Trainer
17. Pencegahan dan Penanggulangan Bahaya Kebakaran
18. Construction Safety Design and Management
19. Confined Space Entry
20. Health & Safety Committee
21. Accident & Illness Prevention Program in the Workplace
22. Pengenalan Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3)
23. Process Safety
24. Risk Management
25. HSE Leadership Training
26. Penanganan Bahan Kimia Berbahaya
27. Behavior Safety
28. Off the Job Safety
29. Safety Awareness
30. Safety for Supervisor
31. Job Hazard Analysis
32. Aplikasi Keselamatan & Kesehatan Kerja berdasarkan sektor pekerjaan (disesuaikan  dengan sektor industri customer)
33. Aplikasi Keselamatan & Kesehatan Kerja berdasarkan jenis pekerjaan
34. Fitness to Work
35. Fatigue (Kelelahan)
36. Substance Abuse in the Workplace
37. Violance in the Workplace
38. Employee Assisstance Program (EAP)
39. Permasalahan pada kerja Shift
40. CPR & First Aid Training – Basic/Intermediate/Advance
41. Aging Workers
42. Health and Safety Committee
43. Warehouse Safety Training
44. Hazard Identification Training
45. Safety Practices
46. Designing Occupational Health Program in the Workplace
47. Health Safety and Environment Management Course

PROGRAM KONSULTAN K3

Selain Pelatihan K3, Phitagoras juga memberikan jasa audit dan konsultasi di bidang K3, yaitu:

1. Occupational Health and Safety Management System based on OHSAS 18001:2007 / SMK3
2. Penyusunan Contractor’s Safety Management System
3. Accident Investigations and Accident Reporting
4. Emergency Action Plans
5. Program Development and Implementation
6. Facility Audit and Recommendations
7. Behavioral Based Safety
8. Penyusunan Health and Safety Policy Documents
9. Risk Assessments
10. Fire Safety Management
11. Health and Safety Procedures
12. Occupational Health and Industrial Hygiene
13. Ergonomics
14. Job Safety Analysis / Job Hazards Analysis
15. Site safety review or safety audit
16. Risk Management
17. HAZOPS / Hazards Operability Studies
18. Safety Diagnosis
19. Building Safety
20. Food Safety
21. Etc

Untuk informasi lebih lanjut,  silahkan menghubungi kami atau silahkan mengisi form dibawah ini.  Tim Marketing kami akan menghubungi bapak/ibu.

ahli k3

Customer Care :

]]> http://phitagoras.co.id/pelatihan_k3.html/feed 48 http://phitagoras.co.id/medical_emergency_course.html http://phitagoras.co.id/medical_emergency_course.html#comments Wed, 05 Nov 2008 05:35:14 +0000 admin http://healthsafetyconsultant.net/?p=47 Keberadaan program tanggap darurat medik (medical emergency response plan = MERP) merupakan bagian dari standar kesehatan minimum yang harus diterapkan karena Keberadaan program ini disetiap tempat kerja yang berisiko tinggi, merupakan keharusan dalam rangka mengantisipasi terjadinya gawat daruratan dibidang medis. Penanganan ini tidak hanya merupakan tanggung jawab pihak kesehatan, namun perlu ditangani secara terpadu dengan melibatkan semua departemen yang ada di perusahaan.

GARIS BESAR MATERI TRAINING MEDICAL EMERGENCY

1.OCCUPATIONAL HEALTH INTRODUCTION (Pengantar Kesehatan Kerja):
Tinjauan umum program Kesehatan Kerja dari sisi peraturan perundangan, best practices serta relevansi dalam pencapaian pekerja sehat dan produktif.
2. HEALTH RISK ASSESSMENT.
Identifikasi keberadaan faktor risiko yang berpotansi menjadi sumber kegawat daruratan, sangat penting dilakukan untuk menetapkan perencanaan tanggap darurat ini, agar lebih terarah dan efektif.
3.EMERGENCY RESPONSE PLAN (Penanggulangan gawat darurat di tempat kerja).
Mengingat risiko terhadap Keselamatan dan Kesehatan Kerja yang tinggi, maka rencana tanggap darurat medis di tempat kerja sangatlah penting. Bagaimana penanganan di tahap awal terjadinya kedaruratan sampai kepada proses rujukan, perlu direncanakan secara matang

MANFAAT TRAINING MEDICAL EMERGENCY
Selesai mengikuti training medical emergency ini, diharapkan peserta :
• Dapat memahami kebutuhan akan adanya program tanggap darurat medis.
• Mampu melakukan pendekatan melalui sistem yang terintegrasi serta koordinasi.
• Memahami peranan masing-masing dalam program tanggap darurat medis ini.

SIAPA YANG PERLU MENGHADIRI?
Manajer HRD, Penanggung jawab HSE, Dokter / Paramedik di Perusahaan, General Services, Siapa saja yang berminat.

DURASI
14 jam efektif (2 hari kerja)

JADWAL TRAINING MEDICAL EMERGENCY

Please Call Us

INVESTASI:
Please Call Us

ahli k3

]]> http://phitagoras.co.id/medical_emergency_course.html/feed 1 http://phitagoras.co.id/training-noise-control.html http://phitagoras.co.id/training-noise-control.html#comments Tue, 07 Oct 2008 08:33:50 +0000 admin http://healthsafetyconsultant.net/?p=356 OBJECTIVES
Setelah mengikuti training noise control ini para peserta akan dapat :

1. Meningkatkan pengetahuan tentang aspek fisis kebisingan ditempat kerja.
2. Meningkatkan pengetahuan tentang tanggapan manusia terhadap kebisingan ditempat kerja.
3. Meningkatkan keterampilan tentang pengukuran dan analisis kebisingan ditempat kerja .
4. Meningkatkan pengetahuan peserta tentang criteria dan peraturan kebisingan ditempat kerja yang berlaku di Indonesia dan Negara lain.
5. Meningkatkan pengetahuan dalam menyusun program kerja pengendalian kebisingan di unit kerjanya yang terintegrasi dengan program kerja operasional perusahaan/ pabrik baik pada saat normal operasi, start up dan shut down.

TRAINING NOISE CONTROL PROGRAM
1. Dasar akustik I :
• Gelombang suara, Nilai RMS
• Skala Decibel ( dBLin, dBA, dBHL.)
• Penyebaran suara didalam dan diluar ruangan
• Bunyi yang timbul di udara dan di struktur bangunan
• Kriteria bising
2. Karakteristik akustik telinga manusia.
• Mekanisme pendengaran
• Karateristik akustik pendengaran manusia
• Pengaruh bising pada pendengaran
• Perlindungan pendengaran di Industri
3. Sumber bising di Industri.
• Karateristik sumber bising
• Beberapa tipe sumber bising : fan, jet & turbine, pipe, pump,furnace, electrical equipment.
4. Pengukuran dan analisis frekuensi suara
• Dasar pengukuran dan analisa
• Metodologi pengukuran & Sound level meter
• Microphone, Time varying noise dan spectrum analysis
• Noise dosimeter, Intensity meter
• Monitoring kebisingan & Bising ditempat kerja
5. Telinga manusia dan penurunan kemampuan pendengaran
• Prinsip dasar tes audiometry & Peralatan tes audiometry
• Hasil analisa tes audiometry
• Audiometery pada konservasi pendengaran
6. Kriteria dan peraturan bising ditempat kerja.
• Nilai Ambang Batas
• Kepmenaker no. Kep.51/MEN/1999 tentang Nilai Ambang batas faktor Fisika ditempat kerja
7. Pengendalian bising terpadu ditempat kerja.
• Konsep pemecahan masalah kebisingan
• Program kerja pengendalian bising
• Contoh penerapan program pengendalian bising terpadu di tempat kerja
8. Bimbingan dan praktek kerja

WHO SHOULD ATTEND?
Manager K3/ staff K3, Inspector LK3, HSE Manager/ Engineer/ Supervisor, Plant Manager, Maintenance Manager/ Engineer,Process facility manager/ Engineer, Field manager/ engineer, The other person who interested in

DURATION :
21 hours effective ( 3 days)

SCHEDULE : Please Call Us

INVESTMENT : Please Call us

ahli k3

]]> http://phitagoras.co.id/training-noise-control.html/feed 0 http://phitagoras.co.id/hot-work-training-course-indonesia.html http://phitagoras.co.id/hot-work-training-course-indonesia.html#comments Mon, 06 Oct 2008 18:05:43 +0000 admin http://healthsafetyconsultant.net/?p=272 Heat stress is the net heat load on the body from the combined effect of hot environmental conditions (air temperature, radiant heat, humidity and air movement), internal body heat due to physical activity, and clothing requirements. Workplaces and occupations associated with excessive heat exposure include: foundries, steel mills, bakeries, construction sites, kitchens, grounds maintenance, dishwashing and steaming.
Heat stress is largely preventable by engineering and administrative control methods. As a last resort or in extreme conditions, the use of personal protection is warranted. These measures include establishing procedures for acclimatization of new workers, training in safe work practices, reducing the duration of work in hot environments and providing plenty of drinking water. Workers and supervisors must receive adequate training and education to be able to recognize early symptoms of health disorders and seek timely medical help.
Employers can prevent or minimize heat stress hazards by implementing appropriate policies and programs. A workplace heat stress policy must include clearly defined procedures for working safely in hot environments and for providing care to potential heat stroke victims.

OBJECTIVES OF HOT WORK TRAINING
This hot work training will help health and safety committee members and representatives as well as supervisors, managers, engineers and other health and safety professionals to:

1. Conduct hazard assessment of heat exposure in the workplace.
2. Identify risk factors for work in hot environments.
3. Develop prevention programs and practices to reduce injury and illness.
4. Plan problem-solving actions through employee and management involvement.
5. Develop hazard controls based on the most current knowledge in the field of occupational health and safety.
6. Comply with legal requirements.

HOT WORK TRAINING PROGRAMMES

1. Legal Responsibilities to prevent Heat Stress
2. The Body’s response to Hot Environments
3. Safety and Health Concerns
4. Measures of Heat Exposure
5. Heat Exposure Standards and Guidelines
6. Control Measures
7. Occupational Health and Safety Legislation

WHO SHOULD ATTEND ??
Courses are aimed at health and safety committee members, health and safety representatives, employees, supervisors and managers. For training sessions, the course can serve as a practical program for future reference.

DURATION
14 hours effectif (2 days)

SCHEDULE
Please Call Us

INVESTMENT

Please Call Us

ahli k3

Untuk itu diperlukan training safety driving, sehingga diharapkan para pesertanya semakin sadar akan kemungkinan kecelakaan lalu-lintas yang setiap hari selalu membayanginya. Semoga kecelakaan dalam bentuk apapun tidak akan menimpa kita semua.

MANFAAT TRAINING SAFETY DRIVING

1. Meningkatkan kesadaran peserta akan pentingnya sopan santun berlalu-lintas di jalan raya, khususnya yang mengendarai mobil roda empat.
2. Mengetahui apa saja yang bisa menyebabkan kecelakaan lalu-lintas serta bagaimana mencegahnya.
3. Mengerti tata cara mengendarai kendaraan di jalan tol.

GARIS BESAR PROGRAM TRAINING SAFETY DRIVING

1. Peraturan dan sangsi pelanggaran lalu-lintas.
2. Sebab-sebab kecelakaan lalu-lintas.
3. Sopan santun pengemudi (naik-turunkan penumpang, kapan dilarang mengemudi, Kebiasaan buruk pengemudi dll).
4. Berkendara di jalan tol.

SIAPA YANG PERLU MENGHADIRI?
Semua karyawan yang setiap harinya selalu mengemudikan mobil roda empat di jalan raya, Para Driver, Para anggota P2K3

DURASI
14 jam efektif (2 hari kerja)

JADWAL TRAINING SAFETY DRIVING

Please Call us

INVESTASI :
Please Call Us

ahli k3

]]> http://phitagoras.co.id/training-safety-driving.html/feed 1 http://phitagoras.co.id/training-job-safety-analysis-jsa.html http://phitagoras.co.id/training-job-safety-analysis-jsa.html#comments Mon, 06 Oct 2008 08:48:08 +0000 admin http://healthsafetyconsultant.net/?p=263 Employers are responsible for ensuring the health and safety of their employees. This includes informing employees of workplace hazards, providing the equipment necessary to safeguard health and safety, and establishing proper health and safety procedures and practices. Therefore, they have an obligation to assess health and safety risks and to develop safety procedures that will eliminate or mitigate these risks before an employee is required to carry out work. This course outlines job safety analysis (JSA) as a method of identifying potential hazards and developing safe work practices to prevent injuries, illnesses, property damages and other losses.

OBJECTIVES of TRAINING JOB SAFETY ANALYSIS (JSA)
The specific objectives of this Training Job Safety Analysys (JSA) were to help you to :

1. Understand the concept of job safety analysis and;
2. Understand the methods of identifying potential hazards and applicable preventive measures.

TRAINING JOB SAFETY ANALYSIS (JSA) PROGRAMMES
1. What is a Job Safety Analysis (JSA)
2. How to Perform a Job Safety Analysis
3. How and When to Use Job Safety Analysis
4. Follow Up and Review of a job Safety Analysis
5. Others

WHO SHOULD ATTEND ??
Training Job Safety Analysys (JSA) are aimed at the workers, managers and supervisors, members of health and safety committees, and health and safety representatives. Health and safety professionals will find this publication a practical tool for workplace training sessions on health and safety programs and policies.

DURATION : 14 hours effectif (2 days)

SCHEDULE
Please Call Us

INVESTMENT
Please Call Us

ahli k3

OBJECTIVES of OFFICE  SAFETY TRAINING
This Office Safety training course will help health and safety committee members and representatives as well as supervisors, managers, engineers and other health and safety professionals to :

1. Identify key components of a health and safety program
2. Recognize the elements of an ergonomically correct workstation
3. Recognize and control for the potential health effects of poor lighting
4. Recognize causes of, and control workplace stress
5. Identify factors that affect indoor air quality
6. Recognize ways to reduce or eliminate general safety hazards (e.g. slips, trips and falls) and electrical hazards
7. Identify chemical hazards in an office
8. Identify procedures to follow in case of a fire.

CONTENTS of OFFICE SAFETY TRAINING
• Develop a Health and Safety Program
• Potential Hazards in an Office Environment
• Ergonomics
• Lighting
• Workplace Stress
• Indoor Air Quality
• Office Safety
• Chemical Hazards
• Electrical Hazards
• Fire Prevention and Evacuation

WHO SHOULD ATTEND?
Courses are aimed at Office managers, supervisors, and employees, Health and Safety Committee members, Human Resources (HR) professionals.

DURATION of OFFICE SAFETY TRAINING
14 hours effective ( 2 days)

SCHEDULE of OFFICE SAFETY TRAINING

1. Jakarta, 24 June 2009
2. Jakarta, 18 November 2009

INVESTMENT
Fee per Participant Rp. 800.000,-

ahli k3